产品中心

EtherCAT SubDevice Modules

Advantech offers distributed I/O and motion control EtherCAT SubDevices: isolated digital input/output, photoMOS relay output, analog input/output.
AMAX-4270

AMAX-4270

● 4-channel 32-bit encoder counters ● Encoder input mode : CW/CCW , Pulse/Direction, A/B Phase ● Encoder input signal : A, B, Z ● Encoder input frequency : 5 MHz (Maximum) ● 4-channel trigger DO for position compare ● Trigger output frequency : 10 kHz; latch input frequency : 10kHz ● Trigger output mode : sink, source, TTL ● Supports trigger delay time setting for each channel ● 4-channel latch DI for position latch

浏览产品
AMAX-3285IO

AMAX-3285IO

● Max. 5 MHz, 8-axis pulse output ● Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode ● BoardID is switchable ● Easily visible LED indicators on board to do diagnosis ● Direct wire to servo drive to save terminal board space while installation ● Horizontal installation for for servo or stepping motor driver ● Suitable for DIN-rail mounting ● Programmable interrupt ● Memory buffer (10K points) for trajectory planning which is designed in DSP ● 2-axis position compare triggering up to 100 KHz, and memory buffer is up to 100 K points ● Position latch ● Supports gantry mode by semi-closed loop pulse train control ● RDY/LTC-dedicated input channels & SVON/CMP/CAM-DO/ERC-dedicated ● Output channels are switchable for general input and output purposes

浏览产品
AMAX-3245

AMAX-3245

● Max. 5 MHz, 4-axis pulse output ● Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode ● BoardID is switchable ● Easily visible LED indicators on board to do diagnosis ● Direct wire to servo drive to save terminal board space while installation ● Horizontal installation for for servo or stepping motor driver ● Suitable for DIN-rail mounting ● Programmable interrupt ● Memory buffer (10K points) for trajectory planning which is designed in DSP ● 4-axis position compare triggering up to 100 KHz, and memory buffer is up to 100 K points ● Position latch ● Supports gantry mode by semi-closed loop pulse train control ● LTC-dedicated input channels & SVON/CMP/RST/ERC-dedicated Output channels are switchable for general input and output purposes

浏览产品
AMAX-4870

AMAX-4870

● Realizing flexible wiring by daisy chain and branch connection ● Easy to maintain ● To prevent entire system breakdown ● EtherCAT conformance test tool verified

浏览产品
AMAX-4862

AMAX-4862

● Suitable for EtherCAT networks ● 16-ch Isolated Digital Input and 16-ch Form A-type Relay Output ● High-voltage isolation on input channel (2,500 VDC) ● Quick removable European type connector ● LED indicators for I/O status ● Supports EtherCAT Distributed Clock (DC) mode and SyncManager mode ● Two rotary switches for up to 256 SubDevice IDs

浏览产品
AMAX-4856

AMAX-4856

● 适用于 EtherCAT 网络 ● 32通道数字输入和32通道数字输出，具备2,500 VDC隔离 ● 广泛输入电压范围(10 ~ 30 VDC) ● 广泛输出电压范围(5 ~ 40 VDC)和高输出电流(350 mA/ch) ● 可快速卸除的欧规连接器 ● 显示 I/O 状态的 LED 指示灯 ● 支持 EtherCAT 分布式频率 (DC) 模式与 ● SyncManager 模式, 两个旋转开关，最多 256 个从属 ID

浏览产品
AMAX-4834

AMAX-4834

● Suitable for EtherCAT networks ● 32-ch digital output with 2,500 VDC isolation ● Wide output voltage range (5 ~ 40 VDC) and high output current (350 mA/ch) ● Quick removable European type connector ● LED indicators for I/O status ● Supports EtherCAT Distributed Clock (DC) mode and SyncManager mode ● Two rotary switches for up to 256 SubDevice IDs

浏览产品
AMAX-4833

AMAX-4833

● Suitable for EtherCAT networks ● 32-ch digital input with 2,500 VDC isolation ● Wide input voltage range (10 ~ 30 VDC) ● Quick removable European type connector ● LED indicators for I/O status ● Supports EtherCAT Distributed Clock (DC) mode and SyncManager mode ● Two rotary switches for up to 256 SubDevice IDs

浏览产品
AMAX-4830

AMAX-4830

● Suitable for EtherCAT networks ● 16-ch digital input and 16-ch digital output with 2,500 VDC isolation ● Wide input voltage range (10 ~ 30 VDC) ● Wide output voltage range (5 ~ 40 VDC) and high output current (350 mA/ch) ● Quick removable European type connector ● LED indicators for I/O status ● Supports EtherCAT Distributed Clock (DC) mode and SyncManager mode ● Two rotary switches for up to 256 SubDevice IDs

浏览产品
AMAX-4820

AMAX-4820

● 适用于 EtherCAT 网络 ● 4 通道 16 位模拟量输出通道，具备 2,500 VDC 隔离 ● 多重范围的电压或电流输出 ● 可快速卸除的欧规连接器 ● 支持EtherCAT 分布式频率 (DC) 模式与 SyncManager 模式 ● 两个旋转开关，最多 256 个从属 ID

浏览产品
AMAX-4817

AMAX-4817

● 适用于 EtherCAT 网络 ● 8 通道 16 位模拟量输入通道，具备 2,500 VDC 隔离 ● ±275 V 高共模电压范围 ● 可快速卸除的欧规连接器 ● 支持EtherCAT 分布式频率 (DC) 模式与 SyncManager 模式 ● 两个旋转开关，最多 256 个从属 ID

浏览产品
< 1 >

北京诚亚科技有限责任公司

电话：010-53258989

京公网安备 11010802034034号

Copyright © 北京诚亚科技有限责任公司   

网站建设：中企动力 北京  标签

营业执照

天津诚亚科技有限责任公司

电话：022-23723088

山东诚亚科技有限责任公司

电话：18514689349

河南诚亚科技有限责任公司

电话：13140083881

沈阳诚亚科技有限责任公司

电话：024-31328930

西安办事处

电话：18500263046

苏州诚亚科技有限责任公司

电话：0512-65882682

湖南办事处

电话：15011042623

青岛办事处

电话：19853963966

大连办事处

电话：13840169252